Products
High Power serial controlled buck driver
Dimentions 40mm x 50mm x 30mm
- Capable of controlling single LED chains up to 35V.
- Input voltage > LED voltage upto 35V.
- Maximum current output 2.3A
- Available in 350mA 700mA 1.1A 2.3A (Other configurations available upon request. Please Specify)
- Microprocessor controlled control via RS232 or RS485 (please specify).
- Unit can be configured to control brightness via serial interface, PWM input, potentiometer or 0 - 5V input.
- RS485 allows upto 128 units, controlled via the same serial port.
- Multiple units can have identical ID's to provide untimate configuration possibilities.
- Dimmable over 1000 steps.
- Remembers last setting on power up.
- Facilities to connect temperature sensor (available on request) to provide LED over temperature shutdown.
BUCKPUCK
Dimentions 40mm x 50mm x 20mm
- Capable of controlling single LED chains up to 35V.
- Input voltage > LED voltage upto 35V.
- Maximum current output 2.3A
- Available in 350mA 700mA 1000mA 2300A (Other configurations available upon request).
- Unit can be configured to control brightness by PWM input or 0 - 5V input.
PUCKlite
Dimentions 25mm x 25mm x 13mm
- Capable of controlling single LED chains up to 60v .
- Input voltage > LED voltage upto 60V.
- Maximum current output 1000mA
- Three power options:
- 350mA 8W (35V Max input)
- 350mA, 700mA & 1000mA 24W (35V Max input)
- 350mS, 700mA & 1000mA 48W (60V Max input)
- PWM input to provide dimming between 1 & 100% .
- 0.1” header or wire ended termination
- Also Available in wired module 35mm x 15mm x 12mm
LED Light Strip
- Dimentions 8mm x 345mm (24 LED's) can be cut to 115mm (8 LED's)
- Board available in 2 thicknesses 0.2mm thick allowing it to be bent around contours, or standard 1.6mm
- 5 - 25V operation LED brightness independent of supply voltage.
- Bit addressable LED’s, all driven by a fixed constant current (nominally 17mA).
- Simple clock data shift register to address each LED.
- Up to 10 units can be daisy chained at 17mA LED current using 5A power supply.
- Each LED is individually addressable when controlled by user software allowing animation effects to be produced. (See Microprocessor Control Unit)
- Output enable pin allows dimming of strip using PWM.
- Also available with onboard microprocessor allowing dimming of strip via variable resistor.

Full Colour RGB LED Light Strip
- Dimentions 15mm x 345mm (24 LED's) can be cut to 115mm (8 LED's)
- 5 - 25V operation LED brightness independent of supply voltage.
- Bit addressable LED’s, all driven by a fixed constant current (nominally 17mA).
- Simple clock data shift register to address each LED.
- Up to 10 units can be daisy chained at 17mA LED current using 5A power supply.
- Output Enable for each colour allows dimming and mixing Each LED is individually addressable when controlled by user software allowing animation effects to be produced. (See Microprocessor Control Unit)

1-5W LED “BUCK” driver Board
Dimensions 45mm x 35mm
- Control LED's upto 5W per channel.
- Available in 350mA 700mA
- PWM input dimming control 5 - 12V upto 2kHz
- 5 - 25V operation
- Maximum output voltage 25V LED chain voltage.
- Can be “piggy backed” to create RGB stack by simple track cuts.
Microprocessor control unit
Dimensions 60mm x 80mm
- 1-3 channel PWM controller for any of the above drivers.
- 3 inputs potentiometer (not supplied) or 0 - 5V input for 0 - 100% brightness.
- 5 - 35V operation.
- Low power < 50mA
- Programming option available for specific requirements (please contact us)
- Capable of driving upto 1000 light strips (depending on configuration)
- Basic ON / OFF and dimming via potentiometer (not supplied) or 0 - 5V for 0 - 100% brightness.
- Programming option available for specific animation effects. (please contact us)
- User programmable using Microchip MPLab or third party compiler.
- Multiple configurations (contact us for further details)
We have developed a range of Buck (high to low voltage up to 115v AC), buck-boost (high to low / low to high) and boost (low to high) drivers. Please contact us with your requirements if you require information on these or anything else not listed, where we will be delighted to help. If it is something we do not do we will be only too pleased to assist you in the design and development of the product to satisfy your needs.